Following the instraction to Install th led neon signs
Viedo in YouTube:
Install a custom neon sign
THE COMPLETE GUIDE TO INSTALLING AND DISPLAYING LED NEON SIGNS
How to Install LED Neon Signs Using Mini Screws:
If your neon sign comes with cut acrylic backing and Mini Screws. Follow these simple steps to hang it in minutes:
1. Place the neon sign flat against the intended wall or space, lifting it to avoid any damage.
2. Determine the hanging location. Use a marker pen to mark the pre-drilled holes in the wall where the screws will go.
3. Set the sign aside to avoid scratching the acrylic backing. Use a drill with a smaller twist drill bit to create pilot holes on the marked points on the wall.
4. Align the sign with the drilled holes, placing black (or gold/silver) rubber washers over the holes. Therefore Insert the small silver screws through the holes. Secure them by drilling them into the pilot holes.
5. Repeat the process for all screws, ensuring they are secured. Add the small silver end caps onto the black rubber washers to complete the look. Final Step: Plug the sign into the transformer and then into the wall outlet. Your neon sign should illuminate without any issues.
How to Hang a neon sign Using Stand-off Screws:
Stand-off screws are ideal for surface installations like walls. Follow these steps to hang your neon sign using this method:
1. Position the neon sign flat against the desired wall or space, ensuring it is aligned.
2. Use a marker pen to mark the pre-drilled holes in the wall where the screws will go. Confirm the hanging location before proceeding.
3. Place the sign in a safe location to protect the acrylic backing from scratches. Use a drill with a smaller twist drill bit to create pilot holes on the marked points on the wall.
4. Unscrew the mounting pins and position the hollow bases against the drilled pilot holes. Such as Insert the smaller silver securing screws through the hollow entries of the mounting pins. Drill them into the wall, securing the hollow bases in place. Repeat this process for all hollow bases.
5. Position the sign against the secured bases, ensuring proper alignment. For instance Use wider screws to attach the sign to each base, fastening it to the wall. Double-check that all screws are tight.
6. Plug the hanging neon sign into the transformer and then into the wall outlet. It should illuminate.
Install Led Neon Signs by Hanging The Neon Signs with cable:
Measure the gap between the pre-drilled holes on your sign's acrylic backing. Mark these distances on the overhead surface for the silver vertical mounts.
Position the silver vertical mounts on the marked points, marking the three screw holes on each mount for drilling.
Drill pilot holes on marked points, then secure the mounts with screws using a screwdriver drill bit.
Measure and cut the plastic-coated hanging wires to the desired length, leaving extra for creating a loop at the end.
Attach the wires to the mounts by pressing down on the mount's spring-powered mouth, feeding the wire in, and releasing the mouth to grip the wire.
Thread one end of each wire through a silver crimp, then through the hole on your sign's backing, looping it back through the other hole in the crimp. Secure by compressing the crimp with pliers.Moreover Repeat for other wires.
Final Step: Connect your sign to the transformer, then plug it into the wall outlet to light up your neon sign.
Now you're equipped to effortlessly hang your neon sign using suspension wires!
If you still need any help just whats app us
